Skip to product information
1 of 9

Grille integration kit Ford F-150 Raptor (2024+) – Carbon-6 Spot Yellow - LAZER

LAZER LAMPS

In stock


Regular price CHF 1,127.00
Sale price CHF 1,127.00 Regular price CHF 1,252.00
Tax included. Shipping calculated at checkout.
Secure checkout with PayPal

  • 100% secure payment
  • Equipment Tested & Approved
  • Fast & Careful Shipping

Questions about this Product?

We are here to help you.

Install two projectors LAZER Carbon-6 Spot Yellow Dip in the original grille of your Ford F-150 Raptor 2024+. The kit combines the lamps, specific supports and an electrical harness to obtain an installation integrated into the front panel.

Additional lighting integrated into your F-150 Raptor

The Spot version favors range and a concentrated beam.

Main features

Long Range Spot Beam

The optics focus the beam at an angle of 32° horizontal and 12° vertical. The performances indicated in the table correspond to both lamps in Boost mode.

Yellow Dip function

An additional yellow mode can be activated to adapt the lighting to visibility conditions. It complements the main white beam; it does not replace the original regulatory lights.

Specific and resistant supports

The mounting parts are made of high-strength UV-stabilized composite. They are designed to resist bad weather and chemical agents while maintaining the lighting in the intended position.

Kit contents

  • 2 LAZER Carbon-6 Spot Yellow Dip LED spotlights
  • Specific grille mounting kit, with four supports and fixings
  • Electrical harness for two lamps
  • Installation Instructions

Ideal for 4x4, Camping and off-road travel

  • Night journeys and trips with suitable additional lighting
  • Preparation of travel vehicles and access to bivouac sites
  • Off-road routes, respecting authorized lighting modes

Technical specifications

Feature Specification
Brand LAZER
Vehicle Ford F-150 Raptor 2024+
Equipment Carbon-6 Spot Yellow Dip
Projectors included 2 × LAZER Carbon-6 Spot Yellow Dip
Total luminous flux, Boost mode 18,720 lm
Flow in the driver's field of vision 13,120 lm
Main beam color temperature 5000K
Horizontal/vertical angle 32° / 12°
Range at 1 lux 1,086m
Range at 0.5 lux 1,536m
Range at 0.25 lux 2,173m
Range at 3 lux 627 m
Voltage 10–32V
Total power 170W
Current at 14.4 V 11.8A
Lamp connections Deutsch DT 4 pin, 25 cm cable
Protection IP68
high beam ECE R149, ref. 2 × 37.5 in Low Output mode
Electromagnetic compatibility ECE R10
Manufacturing Royaume University
Salt spray test ISO 9227
Surge protection ISO 7637-2

Compatibility and important information

Specific kit for Ford F-150 Raptor 2024+. The 2017–2020 and 2024+ kits are not interchangeable. This application concerns the F-150 Raptor, not the Ford Ranger Raptor.

The main beam approval shown applies only to Low Output mode. The power and range figures in Boost mode do not describe the approved mode.

If no 12V high beam signal can be recovered, a CAN interface may be required. The LAZER CANNY interface is an additional option: check the exact vehicle configuration and supported functions before installation.

Check the shape of the grille and any original equipment before ordering. Only use the lamps intended for these supports and follow the assembly instructions.

Installation

Present the supports and use the guides before cutting. Fix the elements with the provided screws, connect the harness according to the instructions, then adjust and check the operation of the lighting. Grille cutting may be necessary; do not consider this kit to be a no-modification build.

Warranty

LAZER manufacturer warranty 5 years, according to the brand's conditions. Follow the assembly and use instructions; the warranty on the supports does not cover their association with lighting from another brand.

Share with your Friends & Family
Grille integration kit Ford F-150 Raptor (2024+) – Carbon-6 Spot Yellow - LAZER

CHF 1,127.00